●Description
●These dual channel optocouplers contain a pair of light emitting diodes and integrated photodetectors with electrical insulation between input and output. Separate connection for the photodiode bias and output transistor collectors increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base collector capacitance.
●Features
●• 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V
● (HCPL-4534/0534)
●• High Speed: 1 Mb/s
●• TTL Compatible
●• Available in 8 Pin DIP, SO-8, and 8 Pin DIP – Gull Wing Surface Mount (Option 020) Packages
●• High Density Packaging
●• 3 MHz Bandwidth
●• Open Collector Outputs
●• Guaranteed Performance from 0°C to 70°C
●• Safety Approval
● UL Recognized – 2500 V rms
● for 1 minute (5000 V rms for
● 1 minute for Option 020) per
● UL1577
● CSA Approved
●• Single Channel Version
● Available (4502/3, 0452/3)
●• MIL-STD-1772 Version
● Available (55XX/65XX/4N55)
●Applications
●• Line Receivers – High Common Mode Transient Immunity (>1000 V/µs) and Low Input-Output Capacitance (0.6 pF)
●• High Speed Logic Ground
● Isolation – TTL/TTL, TTL/LTTL, TTL/CMOS, TTL/LSTTL
●• Replace Pulse Transformers
● – Save Board Space and Weight
●• Analog Signal Ground
● Isolation – Integrated Photon
● Detector Provides Improved
● Linearity over Phototransistor Type
●• Polarity Sensing
●• Isolated Analog Amplifier –
● Dual Channel Packaging
● Enhances Thermal Tracking
Part 3D Model
