HCPL-2530-300E Datasheet PDF - AVAGO Technologies

●Description

●These dual channel optocoup lers contain a pair of light emitting diodes and integrated photo-detec tors with electrical insulation between input and output. Separate connection for the photodiode bias and output transistor collectors increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.

●These dual channel optocouplers are available in an 8 Pin DIP and in an industry standard SO-8 package. The following is a cross reference table listing the 8 Pin DIP part number and the electrically equivalent SO-8 part number.

●Features

●• 15 kV/μs minimum common mode transient immunity at VCM = 1500 V (HCPL-4534/0534)

●• TTL compatible

●• Available in 8 pin DIP, SO-8, and 8 pin DIP – gull wing surface mount (option 020) packages

●• High density packaging

●• 3 MHz bandwidth

●• Open collector outputs

●• Safety approval

●   UL Recognized – 3750 V rms for 1 minute (5000 V rms

●   for 1 minute for Option 020) per UL1577

●   CSA Approved

●   IEC/EN/DIN EN 60747-5-2

●   – VIORM = 630 Vpeak for HCPL-2530/2531/4534 0ption 060

●   – VIORM = 560 Vpeak for HCPL-0530/0531/0534 0ption 060

●• Single channel version available (4502/3, 0452/3)

●• MIL-PRF-38534 hermetic version available

●   (55XX/65XX/4N55)

●Applications

●• Line receivers – high common mode transient immunity (>1000 V/μs) and low input-output capacitance (0.6 pF)

●• High speed logic ground isolation – TTL/TTL, TTL/LTTL, TTL/CMOS, TTL/LSTTL

●• Replace pulse transformers – save board space and weight

●• Analog signal ground isolation – integrated photon detector provides improved linearity over phototran sistor type

●• Polarity sensing

●• Isolated analog amplifer – dual channel packaging enhances thermal tracking