HD3SS460RHRT Datasheet PDF - TI

●The HD3SS460RHRT is a high-speed bidirectional Passive Switch in mux or demux configurations. Based on control pin POL the device provides switching to accommodate connector flipping. The device also provides mixing between 2-channel Data/2-channel video and all 4-channel video based on control pin AMSEL. The device also provides cross-points MUX for low speed pins as needed in flippable connector implementation. The HD3SS460 is a generic analogue differential passive switch that can work for any high speed interface applications as long as it is biased at a common mode voltage range of 0 to 2V and has differential signalling with differential amplitude up to 1800mVpp. It employs an adaptive tracking that ensures the channel remains unchanged for entire common mode voltage range. Excellent dynamic characteristics of the device allow high speed switching with minimum attenuation to the signal eye diagram with very little added jitter.

● Provides MUX solution for USB Type-C™ ecosystem including alternate mode (AM)

● Compatible for source/host and sink/device applications

● Provides cross-point MUX for low speed SBU pins

● Bidirectional "Mux/De-Mux" differential switch

● Supports common mode voltage 0 to 2V

● Low power with 1µA shutdown and 0.6mA active

● Green product and no Sb/Br

●Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.