INA138NA/250G4 Datasheet PDF - TI

●The INA138NA/250G4 is a 36V, high-side, Current Output Current Shunt Monitor, laser trimmed for very low offset voltage (50µV), drift (0.5µV/°C) and high common-mode rejection (120dB at G >=100). It operates with power supplies as low as ±2.25V and quiescent current is only 700µA - ideal for battery-operated systems. Internal input protection can withstand up to ±40V without damage. The INA138NA/250G4 is high-side, unipolar, current shunt monitors. Wide input common-mode voltage range, low quiescent current. Input common-mode and power-supply voltages are independent and can range from 2.7 to 36V for the INA138NA/250G4. Quiescent current is only 25µA, which permits connecting the power supply to either side of the current measurement shunt with minimal error. The device converts a differential input voltage to a current output. This current is converted back to a voltage with an external load resistor that sets any gain from 1 to over 100.

● Complete unipolar high-side current measurement circuit

● Wide supply and common-mode range

● Independent supply and input common-mode voltages

● Single resistor gain set

● Low quiescent current of 25µA (typical)

● Green product and no Sb/Br

●Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.