ISO1I813T Datasheet PDF - Infineon

●The ISO1I813T is an electrically isolated 8 bit Data Input Interface used to detect the signal states of eight independent input lines according to IEC61131-2 Type 1/2/3 (e.g. two-wire proximity switches) with a common ground (GNDFI). For operating sensors of type 1/2/3 in accordance with IEC61131-2, it is necessary for the device to be wired with resistors RV and REXT (it is recommended to use resistors with an accuracy of 2%, in any case < 5% - is mandatory, temperature-coefficients < 200ppm are allowed). An 8 bit parallel µC compatible interface allows connecting the IC directly to a µC system. The input interface is designed to operate with 3.3/5V CMOS compatible levels. The data transfer from input to output side is realized by the integrated Coreless Transformer Technology.

● Temperature range up to 135°C TJunction

● Low temperature drift

● Superior EMI robustness

● Robust over operational lifetime

● Secure data transfer under very harsh conditions

● Complete system integration

● 8-channel input according to IEC61131-2 (Type 1/2/3)

● Integrated galvanic isolation 500VAC (EN60664-1, UL1577)

● Adjustable deglitching filters

● Up to 500kHz sampling frequency

● Wire-break detection

● VBB under-voltage detection