●Description
●ISO7420FCC provides galvanic isolation up to 2500 VRMS for 1 minute per UL and 4242 VPK per VDE. This device has two isolated channels. Each channel has a logic input and output buffer separated by a silicon dioxide (SiO2) insulation barrier. Used in conjunction with isolated power supplies, this device prevents noise currents on a data bus or other circuit from entering the local ground and interfering with or damaging sensitive circuitry. The suffix F indicates low-output option in fail-safe conditions (see Table 2). This device has integrated noise filter for harsh environments where short noise pulses may be present at the device input pins.
●Features
●• Signaling Rate: 50 Mbps (5-V Supplies)
●• Output is Low in Default Mode
●• Integrated Noise Filter on the Input Pins
●• Low Power Consumption: Typical ICC per Channel
● – 1.8 mA at 1 Mbps, 3.9 mA at 25 Mbps (5-V Supplies)
● – 1.4 mA at 1 Mbps, 2.6 mA at 25 Mbps (3.3-V Supplies)
●• Low Propagation Delay: 20 ns Typical (5-V Supplies)
●• Channel-to-Channel Output Skew: 2 ns Maximum
●• 3.3-V and 5-V Level Translation
●• Wide TA Range Specified: –40°C to 125°C
●• 60-KV/μs Transient Immunity, Typical (5-V Supplies)
●• Low Emissions
●• Isolation Barrier Life: > 25 Years
●• Operates from 2.7-V to 5.5-V Supply Levels
●• Narrow Body SOIC-8 Package
●• Safety and Regulatory Approvals
● – 4242 VPK Isolation per DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
● – 2.5 KVRMS Isolation for 1 Minute per UL 1577
● – CSA Component Acceptance Notice 5A, IEC 60950-1 and IEC 61010-1 End Equipment Standards
● – GB4943.1-2011 CQC Certification
●Applications
●• Opto-Coupler Replacement in:
● – Industrial FieldBus
● – ProfiBus
● – ModBus
● – DeviceNet™ Data Buses
● – Servo Control Interface
● – Motor Control
● – Power Supplies
● – Battery Packs
Part 3D Model
