●General Description
●The KSZ8051 is a single supply 10Base-T/100Base-TX Ethernet physical layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable.
●The KSZ8051 is a highly integrated, compact solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs and by integrating a low noise regulator to supply the 1.2V core.
●The KSZ8051MNL offers the Media Independent Interface (MII) and the KSZ8051RNL offers the Reduced Media Independent Interface (RMII) for direct connection with MII/RMII compliant Ethernet MAC processors and switches.
●Features
●• Single-chip 10Base-T/100Base-TX IEEE 802.3 compliant Ethernet Transceiver
●• MII Interface support (KSZ8051MNL)
●• RMII v1.2 Interface support with 50MHz reference clock output to MAC, and option to input 50MHz reference clock (KSZ8051RNL)
●• Back-to-Back mode support for 100Mbps copper repeater or media converter
●• MDC/MDIO Management Interface for PHY register configuration
●• Programmable interrupt output
●• LED outputs for link, activity and speed status indication
●• On-chip termination resistors for the differential pairs
●• Baseline Wander Correction
●• HP Auto MDI/MDI-X for reliable detection and correction for straight-through and crossover cables with disable and enable option
●• Auto-negotiation to automatically select the highest link up speed (10/100 Mbps) and duplex (half/full)
●• Power down and power saving modes
●• LinkMD® TDR-based cable diagnostics for identification of faulty copper cabling
●• Parametric NAND Tree support for fault detection between chip I/Os and board.
●• Loopback modes for diagnostics
●• Single 3.3V power supply with VDD I/O options for 1.8V, 2.5V, or 3.3V
●• Built-in 1.2V regulator for core
●• Available in 32-pin (5mm x 5mm) QFN package
●Applications
●• Game Console
●• IP Phone
●• IP Set-top Box
●• IP TV
●• LOM
●• Printer
