LM25007MM Datasheet PDF - TI

●The LM25007MM is a constant on-time non-synchronous Buck Regulator features all of the functions needed to implement an efficient power supply. Capable of driving a 0.5A load over a 9 to 42V input voltage range. Ultra-fast transient response is achieved through the use of a constant on-time architecture with Vin feed forward. This feature provides an almost constant operating frequency over load and input voltage variations. The operating frequency can be adjusted with a single resistor. This architecture is easy to use and tolerant of component selection. An intelligent current limit is implemented in the LM25007 with forced off time that is inversely proportional to Vout thus ensuring recovery from fault conditions. The output voltage may be set from 2.5 to >30V. To improve efficiency in light load applications, the Vcc pin can be connected to an external voltage source to eliminate the drop through the internal regulator.

● Ultra-fast transient response

● No control loop compensation required

● Vin feed forward provides constant operating frequency

● Highly efficient operation

● Intelligent current limit protection

● External shutdown control

● Thermal shutdown

●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.