LM324N Datasheet PDF - TI

●These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2902), and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.

● Wide supply voltage ranges

● Low supply-current drain independent of supply voltage

● Common-mode input voltage range includes ground, allowing direct sensing near ground

● Low input bias and offset parameters

● Internal frequency compensation

● Common mode input voltage range includes ground, allowing direct sensing near ground

● Input offset voltage is typically 3mV

● Input offset current is typically 2nA

● Differential input voltage range of 32V equal to maximum rated supply voltage

● Operating temperature range from 0°C to 70°C

●This device has limited built-in ESD protection. The leads should be shorted together or device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

●Supply voltages larger than 32V for single supply and outside the range of ±16V for dual supply can permanently damage the device.