●These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.
●The LM193 device is characterized for operation from −55°C to 125°C. The LM293 and LM293A devices are characterized for operation from −25°C to 85°C. The LM393 and LM393A devices are characterized for operation from 0°C to 70°C. The LM2903 device is characterized for operation from −40°C to 125°C.
● Single-Supply or Dual Supplies
● Wide Range of Supply Voltage
● Maximum Rating: 2 V to 36 V
● Tested to 30 V: Non-V Devices
● Tested to 32 V: V-Suffix Devices
● Low Supply-Current Drain Independent of Supply
●Voltage: 0.4 mA (Typical) Per Comparator
● Low Input Bias Current: 25 nA (Typical)
● Low Input Offset Current: 3 nA (Typical) (LM139)
● Low Input Offset Voltage: 2 mV (Typical)
● Common-Mode Input Voltage Range
●Includes Ground
● Differential Input Voltage Range Equal to
●Maximum-Rated Supply Voltage: ±36 V
● Low Output Saturation Voltage
● Output Compatible With TTL, MOS, and CMOS
● On Products Compliant to MIL-PRF-38535,
●All Parameters Are Tested Unless Otherwise
●Noted. On All Other Products, Production
●Processing Does Not Necessarily Include
●Testing of All Parameters.
Part 3D Model
