LM5001SD/NOPB Datasheet PDF - TI

●The LM5001SD/NOPB is a non-synchronous Switch-mode Regulator features all of the functions necessary to implement efficient high-voltage Boost, Flyback, SEPIC and Forward converters, using few external components. This easy-to-use regulator integrates a 75V N-channel MOSFET with a 1A peak current limit. Current mode control provides inherently simple loop compensation and line-voltage feed-forward for superior rejection of input transients. The switching frequency is set with a single resistor and is programmable up to 1.5MHz. The oscillator can also be synchronized to an external clock. Additional protection features include current limit, thermal shutdown, under-voltage lockout and remote shutdown capability.

● AEC-Q100 Qualified

● Ultra-wide input voltage range

● Integrated high voltage bias regulator

● Adjustable output voltage

● 1.5% Output voltage accuracy

● Wide bandwidth error amplifier

● Integrated current sensing and limiting

● Integrated slope compensation

● 85% Maximum duty cycle limit

● Single resistor oscillator programming

● Oscillator synchronization capability

● Enable/under-voltage lockout (UVLO) Pin

● Thermal shutdown

● Green product and no Sb/Br

●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.