LM75BIM-3/NOPB Datasheet PDF - TI

●The LM75BIM-3/NOPB is a ±2°C industry standard Temperature Sensor with an integrated Sigma-Delta analogue-to-digital converter and I²C interface. Communication is accomplished over a 2-wire interface which operates up to 400kHz. The LM75 has three address pins, allowing up to eight LM75 devices to operate on the same 2-wire bus. The sensor has a dedicated over-temperature output (O.S.) with programmable limit and hysteresis. This output has programmable fault tolerance, which allows the user to define the number of consecutive error conditions that must occur before O.S. is activated.

● No external components required

● Shutdown mode to minimize power consumption

● Up to eight LM75s can be connected to a single bus

● Power up defaults permit stand-alone operation as thermostat

● UL recognized component

●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.