●The LM92 is a digital temperature sensor and thermal window comparator with an I2C Serial Bus interface and an accuracy of ±0.33°C. The window-comparator architecture of the LM92 eases the design of temperature control systems. The open-drain Interrupt (INT) output becomes active whenever temperature goes outside a programmable window, while a separate Critical Temperature Alarm (T_CRIT_A) output becomes active when the temperature exceeds a programmable critical limit. The INT output can operate in either a comparator or event mode, while the T_CRIT_A output operates in comparator mode only.
●The host can program both the upper and lower limits of the window as well as the critical temperature limit. Programmable Hysteresis as well as a fault queue are available to minimize false tripping. Two pins (A0, A1) are available for address selection. The sensor powers up with default thresholds of 2°C THYST, 10°C TLOW, 64°C THIGH, and 80°C T_CRIT.
●The LM92"s 2.7V to 5.5V supply voltage range, Serial Bus interface, 12-bit + sign output, and full-scale range of over 128°C make it ideal for a wide range of applications. These include thermal management and protection applications in personal computers, electronic test equipment, office electronics, automotive, medical and HVAC applications.
● Window Comparison Simplifies Design of ACPI-Compatible Temperature Monitoring and Control
● Serial Bus Interface
● Separate Open-Drain Outputs for Interrupt and Critical Temperature Shutdown
● Shutdown Mode to Minimize Power Consumption
● Up to Four LM92s can be Connected to a Single Bus
● 12-Bit + Sign Output
● Operation up to 150°C
●## Key Specifications
● Supply Voltage 2.7V to 5.5V
● Supply Current operating 350 μA (typ) 625 μA (max) shutdown 5 μA (typ)
● Temperature Accuracy
● 30°C, ±0.33°C (max)
● 10°C to 50°C, ±0.50°C (max)
● −10°C to 85°C, ±1.0°C (max)
● 125°C, ±1.25°C (max)
● −25°C to 150°C, ±1.5°C (max)
● Linearity ±0.5°C (max)
● Resolution 0.0625°C
●All trademarks are the property of their respective owners.