LMV116MF Datasheet PDF - TI

●The LMV116MF is a single low voltage Operational Amplifier with rail-to-rail output. The voltage feedback amplifier offers high speed (45MHz) and low voltage operation (2.7V). Output voltage range extends to within 20mV of either supply rail, allowing wide dynamic range especially in low voltage applications. Even with low supply current of 600µA, output current capability is kept at a respectable ±20mA for driving heavier loads. Important device parameters such as BW, slew rate and output current are kept relatively independent of the operating supply voltage by a combination of process enhancements and design architecture. Both turn-on and turn-off characteristics are well behaved with minimal output fluctuations during transitions. This allows the part to be used in power saving mode, as well as multiplexing applications.

● Output voltage swing 20mV from rails

● 600µA Supply current

● 15µA Power down supply current

● 32mA Output short-circuit current

● ±20mA Linear output current

● -0.3 to 1.7V Input common mode voltage

● 40nV/√Hz Input voltage noise

● 0.75pA/√Hz Input current noise

● Green product and no Sb/Br