●The LP2992 is a 250-mA, fixed-output voltage regulator designed to provide ultra-low dropout and low noise in battery-powered applications.
●Using an optimized vertically integrated PNP (VIP) process, the LP2992 delivers unequaled performance in all specifications critical to battery-powered designs:
● Dropout voltage: Typically 450 mV at 250-mA load, and 5 mV at 1-mA load.
● Ground pin current: Typically 1500 µA at 250-mA load, and 75 µA at 1-mA load.
● Enhanced stability: The LP2992 is stable with output capacitor equivalent series resistance (ESR) as low as 5 mΩ, which allows the use of ceramic capacitors on the output.
● Sleep mode: Less than 1-µA quiescent current when ON/OFF pin is pulled low.
● Smallest possible size: SOT-23 and WSON packages use absolute minimum board space.
● Precision output: 1% tolerance output voltages available (A grade).
● Low noise: By adding a 10-nF bypass capacitor, output noise can be reduced to 30 µV (typical).
● Multiple voltage options, from 1.5 V to 5 V, are available as standard products. Consult factory for custom voltages.
●For all available packages, see the orderable addendum at the end of the data sheet.
● Input Voltage Range: 2.2 V to 16 V
● Output Voltage Range: 1.5 V to 5 V
● Wide Supply Voltage Range (16-V Maximum)
● Output Voltage Accuracy 1% (A Grade)
● Ultra-Low-Dropout Voltage
● Specified 250-mA Output Current
● Stable With Low-ESR Output Capacitor
● < 1-µA Quiescent Current When Shut Down
● Low Ground Pin Current at All Loads
● High Peak Current Capability
● Low ZOUT: 0.3-Ω Typical (10 Hz to 1 MHz)
● Overtemperature and Overcurrent Protection
● −40°C to +125°C Junction Temperature Range
● Smallest Possible Size (SOT-23, WSON Package)
● Requires Minimum External Components
● Custom Voltages Available
