LPC2368FBD100,551 Datasheet PDF - NXP

●The LPC2368FBD100,551 is an ARM7 Microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 72MHz. Features include up to 256kB of flash memory, up to 58kB of RAM, Ethernet MAC, USB device/host/OTG, DMA controller, SD/MMC, 4 UARTs, 2 CAN channels, 3 SSP/SPI, 3 I²C, I²S, 8-channel 10-bit ADC, 10-bit DAC, 2 PWM, 4 general purpose timers, low power real-time clock with separate battery supply and up to 70 general purpose I/O pins.

● Dual advanced high-performance bus (AHB) system

● Advanced vectored interrupt controller (VIC)

● General purpose DMA controller (GPDMA) on AHB

● Ethernet MAC with associated DMA controller

● Four UARTs with fractional baud rate generation

● USB 2.0 full-speed device with on-chip PHY

● CAN controller with two channels

● Two SSP controllers, with FIFO and multi-protocol capabilities

● I2S (Inter-IC Sound) interface for digital audio input or output

● SD/MMC memory card interface

● 70 General purpose I/O pins with configurable pull-up/down resistors

● 10-bit ADC with input multiplexing among 6 pins and 10-bit DAC

● One PWM/timer block with support for three-phase motor control

● Standard ARM test/debug interface for compatibility with existing tools

● Emulation trace module supports real-time trace

● Four reduced power modes of idle, sleep, power-down and deep power-down

● Four external interrupt inputs configurable as edge/level sensitive

● Processor wake-up from Power-down mode via any interrupt

● Two independent power domains allow fine tuning of power consumption

● Each peripheral has its own clock divider for further power saving

●ESD sensitive device, take proper precaution while handling the device.