●The LPC4078FET180,551 is a 32-bit Microcontroller based on ARM Cortex-M4 operates at a maximum frequency of 120MHz. The ARM Cortex-M4 CPU incorporates a 3-stage pipeline, uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals and includes an internal prefetch unit that supports speculative branching. The ARM Cortex-M4 supports single-cycle digital signal processing and SIMD instructions. A hardware floating-point processor is integrated in the core for several versions of the part. The device incorporates 512kB internal flash, 96kB internal RAM, 4kB EEPROM, one USB Device/Host/OTG, 8-channel 12-bit A/D converter, 10-bit D/A converter, a comparator and 142 general-purpose I/O pins. This device also features peripherals like five UARTs, three inter-integrated circuit (I2C), three serial peripheral interface (SPI) modules and one integrated interchip sound (I2S).
● ARM Cortex-M4 built-in MPU supporting eight regions
● ARM Cortex-M4 built-in nested vectored interrupt controller (NVIC)
● Non-maskable Interrupt (NMI) input
● Hardware floating-point unit
● JTAG and serial wire debug (SWD), serial trace, eight breakpoints and four watch points
● System tick timer
● Multilayer AHB matrix interconnect
● Split APB bus allows for higher throughput with fewer stalls between the CPU and DMA
● Embedded trace macrocell (ETM) module supports real-time trace
● Boundary scan for simplified board testing
● LCD controller - Supporting both STN and TFT
● External memory controller (EMC)
● Eight channel general purpose DMA controller (GPDMA)
● Quad SPI flash interface (SPIFI)
● Ethernet MAC with MII/RMII interface and associated DMA controller
● USB 2.0 full-speed dual port device/host/OTG controller
● CAN controller with two channels
● SD/MMC memory card interface
● Four reduced power modes - Sleep, deep-sleep, power-down and deep power-down
● The wake-up interrupt controller (WIC)
