LT8300ES5#TRMPBF Datasheet PDF - Linear Technology

●The LT8300ES5#TRMPBF is a micropower isolated Flyback Converter with 150V/260mA switch. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with a single external resistor. Internal compensation and soft-start further reduce external component count. Boundary mode operation provides a small magnetic solution with excellent load regulation. Low ripple Burst Mode® operation maintains high efficiency at light load while minimizing output voltage ripple. A 260mA, 150V DMOS power switch is integrated along with all high voltage circuitry and control logic. It operates from an input voltages range of 6 to 100V and can deliver up to 2W isolated output power. The high level of integration and the use of boundary and low ripple burst modes result in a simple to use, low component count and high efficiency application solution for isolated power delivery.

● 260mA, 150V Internal DMOS power switch

● Low quiescent current (70µA in sleep mode and 330µA in active mode)

● Boundary mode operation at heavy load

● Low-ripple Burst Mode® operation at light load

● Minimum load <0.5% (typical) of full output

● VOUT set with a single external resistor

● No transformer third winding or opto-isolator required for regulation

● Accurate EN/UVLO threshold and hysteresis

● Internal compensation and soft-start