●The LTC1052 is a low-noise chopper-stabilized operational amplifier manufactured using CMOS silicon-gate technology. The device is well-suited for applications such as thermocouple amplifiers, strain-gauge amplifiers, low-level signal processing, and medical instrumentation.
●Chopper stabilization constantly corrects input offset voltage errors, including both errors in the initial input offset voltage and errors in input offset voltage due to time, temperature, and common-mode input voltage. The chopper circuitry is internal and completely transparent to the user. Only two external capacitors are required to alternately sample and hold the offset correction voltage and the amplified input signal.
●Low-frequency (1/f) noise is also improved by the chopping technique. Instead of noise increasing continuously at a rate of 3 dB/octave, the internal chopping causes noise to decrease at low frequencies. Picoampere input currents further enhance the performance of this device.
●The C-suffix devices are characterized for operation from -40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of -55°C to 125°C.
● Input Offset Voltage...5 uV Max at 25°C
● Temperature Coefficient of Input Offset Voltage...0.001 uV/°C Typ
● Long-Term Drift of Input Offset Voltage
●100 nV/mo Typ
● Maximum Input Bias Current...30 pA at 25°C
● Minimum Differential Voltage Amplification Over Full Temperature Range...120 dB
● Minimum Common-Mode Rejection Ratio Over Full Temperature Range...120 dB
● Minimum Supply Voltage Rejection Ratio Over Full Temperature Range...120 dB
● Single-Supply Operation from 4.75 V to 16V (Input Voltage Range Extends to Ground)
● External Capacitors Can Be Returned to V
●CC-
● with No Noise Degradation
