MAX153EWP+ Datasheet PDF - Maxim Integrated

●The MAX153EWP+ is a 1Msps, µP compatible, 8bit analogue to digital converter (ADC) with 1µA power-down in 20 pin WSOIC package. This ADC uses a half-flash technique to achieve a 660ns conversion time and digitizes at a rate of 1Msps. It operates with single +5V or dual ±5V supplies and accepts either unipolar or bipolar inputs. A POWERDN (complementary, power-down) pin reduces current consumption to a typical value of 1µA (with 5V supply). The part returns from power-down to normal operating mode in less than 200ns, providing large reductions in supply current in applications with burst-mode input signals. It is dynamically tested and its µP interface appears as memory location or input/output port that requires no external interface logic. The data outputs use latched, three-state buffered circuitry for direct connection to a µP data bus or system input port.

● Supply voltage range is 4.75V to 5.25V

● Operating temperature range from -40°C to 85°C

● Internal track/hold, no external clock required

● Full-power bandwidth of 1MHz

● Unipolar/bipolar inputs, ratiometric reference inputs

● Total unadjusted error is ±1LSB (TUE)

● Signal to noise plus distortion noise is 45dB & total harmonic distortion is -50dB

● Input slew rate is 15V/µs

● Power supply rejection is ±1/16LSB

● Conversion time (RD Mode) is 700ns at TA = +25°C