MAX3232EIPW Datasheet PDF - TI

●DESCRIPTION

●The MAX3232E device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.

●FEATURES

●• ESD Protection for RS-232 Bus Pins

●– ±15 kV (HBM)

●– ±8 kV (IEC61000-4-2, Contact Discharge)

●– ±15 kV (IEC61000-4-2, Air-Gap Discharge)

●• Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards

●• Operates With 3-V to 5.5-V VCC Supply

●• Operates up to 250 kbit/s

●• Two Drivers and Two Receivers

●• Low Supply Current . . . 300 µA Typ

●• External Capacitors . . . 4 × 0.1 µF

●• Accepts 5-V Logic Input With 3.3-V Supply

●• Pin Compatible to Alternative High-Speed Device (1 Mbit/s)

●– SNx5C3232

●APPLICATIONS

●• Battery-Powered Systems

●• PDAs

●• Notebooks

●• Laptops

●• Palmtop PCs

●• Hand-Held Equipment