MAX4105ESA+ Datasheet PDF - Maxim Integrated

●The MAX4105ESA+ is a low noise, low distortion op-amp in 8 pin NSOIC package. This ultra high speed op-amp is compensated for minimum gain of +5V/V and delivers 410MHz bandwidth and 1400V/sec slew rate. Low voltage noise density of 2.1nV/√Hz at f = 1MHz and -74dBc spurious free dynamic range at fC = 5MHz make this device ideal for low noise and low distortion applications. This op-amp has wide output voltage swing of ±3.7V and ±70mA output current drive capability. The MAX4105 is used in ADC input buffers, active filters, ultrasound video buffers, cable drivers, pulse/RF telecom applications and video ADC preamp applications.

● Supply voltage range from ± 3.5V to ± 5.5V

● Operating temperature range from -40°C to 85°C

● 0.1dB bandwidth of 80MHz and full power bandwidth of 370MHz

● Differential phase error of 0.02° (NTSC, RL = 150 ohm)

● Differential gain error of 0.02% (NTSC, RL = 150 ohm)

● Low input offset voltage of ±1mV

● Input bias current of 32µA and input offset current of 0.5µA

● Common mode rejection ratio (CMRR) of 95dB at -2.8V

● Positive PSSR of 85dB at VCC = 3.5V to 5.5V and negative PSRR of 65dB at VEE = -3.5V to -5.5V

● Quiescent supply current of 20mA