MAX4908ETD+T Datasheet PDF - Maxim Integrated

●The MAX4908ETD+T is a dual 3:1 clickless audio multiplexer with negative-signal handling in 14 pin TDFN package. It allows signals as low as VCC - 5.5V to pass through without distortion. This analogue multiplexer has a low on-resistance (0.38ohm), low supply current and operate from a single supply. It has shunt resistors on all input terminals, shunt resistor feature reduces click-and-pop sounds by automatically discharging capacitance at input terminal when they are not connected. A break before make feature further reduces popping. It use two digital control inputs CB1 and CB2 to switch between signals. The digital control inputs can accept up to +5.5V independent of supply voltage. It is used in cell phones, PDAs and handheld devices, notebook computers and MP3 players.

● Supply voltage range is 1.8V to 5.5V

● Operating temperature range from -40°C to 85°C

● Distortion free negative signal throughput down to VCC - 5.5V

● High PSRR reduces supply noise

● Channel to channel matching of 0.1ohm (max)

● On-resistance flatness is 0.35ohm (max)

● Crosstalk of -70dB (typ) at 20KHz

● Off-isolation of -80dB (typ) at 20KHz

● Total harmonic distortion is 0.02% (typ)

● Leakage current is 50nA, supply current is 50nA