MC9S08GT60ACFBE Datasheet PDF - NXP

●The MC9S08GT60ACFBE is a 8-bit General-purpose Microcontroller based on enhanced HCS08 CPU (20MHz bus) with CISC architecture operates at a maximum frequency of 40MHz. The device incorporates 60kB internal flash, 4kB internal RAM, 8-channel 10-bit A/D converter and 36 general-purpose I/O pins. This device also features peripherals like two serial communications interface (SCI) modules and real-time counter (RTC). Breakpoint capability to allow single breakpoint setting during in-circuit debugging. Debug module containing two comparators and nine trigger modes. Eight deep FIFO for storing change-of-flow addresses and event-only data. Debug module supports both tag and force breakpoints.

● HC08 Instruction set with added BGND instruction

● Background debugging system

● Support for up to 32 Interrupt/reset sources

● Power-saving modes - Wait plus three stops

● Optional computer operating properly (COP) reset

● Low-voltage detection with reset or interrupt

● Illegal opcode detection with reset

● Illegal address detection with reset

● Multiple clock source options - crystal, resonator or external clock

● Internally generated clock with ±0.2% trimming resolution and ±0.5% deviation across voltage

● Two 2-channel 16-bit Timer/pulse width modulator (TPM) modules

● 8-pin Keyboard interrupt module (KBI)

● 16 High-current pins (limited by package dissipation)

● Software selectable pull-ups on ports

● Internal pull-up on RESET and IRQ pin