MCP2021-500E/SN Datasheet PDF - Microchip

●The MCP2021-500E/SN is a LIN Transceiver with voltage regulator provides a bidirectional, half-duplex communication physical interface to an automotive and industrial local interconnect (LIN) and SAE J2602 bus. Operation covers LIN bus specification versions 1.3, 2.0, 2.1 and SAE J2602. The device incorporates a voltage regulator with 5V/50mA or 3.3V/50mA output. The regulator is short-circuit protected and also includes thermal shutdown. The regulator has been specifically designed to operate in the automotive environment and will survive reverse battery conditions, +43V load dump transients and double-battery jump starts. The device has been designed to meet the stringent quiescent current requirements of the automotive industry. The device is very low emissions, excellent robustness to automotive transients and very high ESD robustness have been confirmed by independent test authorities.

● LIN bus pin with internal pull-up resistor and diode

● Protect against ground shorts and loss of ground

● Wake up through LIN bus activity (filtered) or LWAKE pin

● Thermal shutdown protection

● Built-in voltage regulator with wide operating voltage range up to 30V

● Load dump protection up to 43V

● Support baud rates up to 20kbaud with LIN-compatible output driver

● Very low EMI meets stringent OEM requirements

● Interface to PIC® EUSART and standard USARTs

● Automatic thermal shutdown

●ESD sensitive device, take proper precaution while handling the device.