MKE02Z64VQH2 Datasheet PDF - NXP

●The MKE02Z64VQH2 is a 32-bit Kinetis KE02 Robust Microcontroller based on ARM Cortex-M0+ RISC architecture core operates at a maximum frequency of 20MHz. The device incorporates 64kB internal flash, 4kB internal RAM, one 12-bit SAR A/D converter, two 6-bit D/A converter and 57 general-purpose I/O pins. This device also features communication interfaces like three UART modules, two SPI modules and one I2C module.

● Single cycle 32 x 32-bit Multiplier

● Single cycle I/O access port

● Oscillator (OSC) - Supports 32.768kHz crystal or 4MHz to 20MHz crystal or ceramic resonator

● Internal clock source (ICS)

● Internal 1kHz Low-power oscillator (LPO)

● Power management module (PMC) with three power modes - run, wait, stop

● Low-voltage detection (LVD) with reset or interrupt, selectable trip points

● Watchdog with independent clock source (WDOG)

● Programmable cyclic redundancy check module (CRC)

● Serial wire debug interface (SWD)

● Bit manipulation engine (BME)

● 64-bit Unique identification (ID) number per chip

● Two up to 8-bit Keyboard interrupt modules (KBI)

● External interrupt (IRQ)

● Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)

● 6-channel Flex timer/PWM (FTM)

● Two 2-channel Flex timer/PWM (FTM)

● 2-channel Periodic interrupt timer (PIT)

● Real-time clock (RTC)