●The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 5 µs.
●The MSP430F5310, MSP430F5309, and MSP430F5308 devices are microcontroller configurations with a 3.3-V LDO, four 16-bit timers, a high-performance 10-bit analog-to-digital converter (ADC), two universal serial communication interfaces (USCIs), a hardware multiplier, DMA, a real-time clock (RTC) module with alarm capabilities, and 31 or 47 I/O pins.
●The MSP430F5304 device is a configuration with a 3.3-V LDO, four 16-bit timers, a high-performance 10-bit ADC, two USCIs, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 31 I/O pins.
●Typical applications for this device include analog and digital sensor systems, digital motor control, remote controls, thermostats, digital timers, and hand-held meters.
● Low Supply-Voltage Range: 3.6 V Down to 1.8 V
● Ultra-Low-Power Consumption
● Active Mode (AM), All System Clocks Active
● 195 µA/MHz (Typical) at 8 MHz, 3 V, Flash Program Execution
● 115 µA/MHz (Typical) at 8 MHz, 3 V, RAM Program Execution
● Standby Mode (LPM3)
● Real-Time Clock (RTC) With Crystal, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake Up:
●1.9 µA (Typical) at 2.2 V,
●2.1 µA (Typical) at 3 V
● Low-Power Oscillator (VLO), General-Purpose Counter, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake Up:
●1.4 µA (Typical) at 3 V
● Off Mode (LPM4)
●Full RAM Retention, Supply Supervisor Operational, Fast Wake Up:
●1.1 µA at 3 V (Typical)
● Shutdown Mode (LPM4.5)
●0.18 µA at 3 V (Typical)
● Wake Up From Standby Mode in Less Than 5 µs
● 16-Bit RISC Architecture, Extended Memory, Up to 25-MHz System Clock
● Flexible Power Management System
● Fully Integrated LDO With Programmable Regulated Core Supply Voltage
● Supply Voltage Supervision, Monitoring, and Brownout
● Unified Clock System
● FLL Control Loop for Frequency Stabilization
● Low-Power Low-Frequency Internal Clock Source (VLO)
● Low-Frequency Trimmed Internal Reference Source (REFO)
● 32-kHz Watch Crystals (XT1)
● High-Frequency Crystals up to 32 MHz (XT2)
● 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers
● 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers
● 16-Bit Timer TA2, Timer_A With Three Capture/Compare Registers
● 16-Bit Timer TB0, Timer_B With Seven Capture/Compare Shadow Registers
● Two Universal Serial Communication Interfaces (USCIs)
● USCI_A0 and USCI_A1 Each Support:
● Enhanced UART Supports Auto-Baudrate Detection
● IrDA Encoder and Decoder
● Synchronous SPI
● USCI_B0 and USCI_B1 Each Support:
● I2C
● Synchronous SPI
● Integrated 3.3-V Power System
● 10-Bit Analog-to-Digital Converter (ADC) With Window Comparator
● Comparator
● Hardware Multiplier Supports 32-Bit Operations
● Serial Onboard Programming, No External Programming Voltage Needed
● Three-Channel Internal DMA
● Basic Timer With RTC Feature
