●The Texas Instruments MSP430F67xx1A family of polyphase metering SoCs are powerful highly integrated solutions for revenue meters that offer accuracy and low system cost with few external components. The MSP430F67xx1A uses the low-power MSP430 CPU with a 32-bit multiplier to perform all energy calculations, metering applications such as tariff rate management, and communications with AMR and AMI modules.
●The MSP430F67xx1A features Texas Instruments" 24-bit sigma-delta converter technology, which provides better than 0.1% accuracy. Family members include up to 512KB of flash, 32KB of RAM, and an LCD controller with support for up to 320 segments.
●The ultra-low-power nature of the MSP430F67xx1A means that the system power supply can be minimized to reduce overall cost. Low standby power means that backup energy storage can be minimized, and critical data can be retained longer in case of a mains power failure.
●The MSP430F67xx1A family executes the Texas Instruments energy measurement software library, which calculates all relevant energy and power results. The energy measurement software library is available with the MSP430F67xx1A at no cost. Industry standard development tools and hardware platforms are available to speed development of meters that meet all of the ANSI and IEC standards globally.
● Accuracy < 0.1% Over 2000:1 Dynamic Range for Phase Current
● Meets or Exceeds ANSI C12.20 and IEC 62053 Standards
● Support for Multiple Sensors Such as Current Transformers, Rogowski Coils, or Shunts
● Power Measurement for up to Three Phases Plus Neutral
● Dedicated Pulse Output Pins for Active and Reactive Energy for Calibration
● Four-Quadrant Measurement per Phase or Cumulative
● Exact Phase-Angle Measurements
● Digital Phase Correction for Current Transformers
● Temperature Compensated Energy Measurements
● 40-Hz to 70-Hz Line Frequency Range Using Single Calibration
● Flexible Power Supply Options With Automatic Switching
● Display Operates at Very Low Power During AC Mains Failure: 3 µA in LPM3
● LCD Driver With Contrast Control for up to 320 Segments
● Password-Protected Real-Time Clock With Crystal Offset Calibration and Temperature Compensation
● Integrated Security Modules to Support Anti-Tamper and Encryption
● Multiple Communication Interfaces for Smart Meter Implementations
● High-Performance 25-MHz CPU With 32-Bit Multiplier
● Wide Input Supply Voltage Range:
●3.6 V Down to 1.8 V
● Ultra-Low Power Consumption During Energy Measurement
● 2.9 mW at 10-MHz Operation (3 V)
● Multiple Low-Power Modes
● Standby Mode (LPM3): 2.1 µA at 3 V,
●Wake Up in Less Than 5 µs
● RTC Mode (LPM3.5): 0.34 µA at 3 V
● Shutdown Mode (LPM4.5): 0.18 µA at 3 V
● Up to 512KB of Single-Cycle Flash
● Up to 32KB of RAM With Single-Cycle Access
● Up to Seven Independent 24-Bit Sigma-Delta ADCs With Differential Inputs and Variable Gain
● System 10-Bit 200-ksps ADC
● Six Channels Plus Supply and Temperature Sensor Measurement
● Six Enhanced Communications Ports
● Configurable Among Four UART, Six SPI, and Two I²C Interfaces
● Four 16-Bit Timers With Nine Total Capture/Compare Registers
● 128-Pin LQFP (PEU) Package With 90 I/O Pins
● 100-Pin LQFP (PZ) Package With 62 I/O Pins
● Industrial Temperature Range of –40°C to 85°C
● Three-Phase Electronic Watt-Hour Meter Development Tools
● EVM430-F6779A With SLAA577 Application Note
● MSP430™ Energy Library
● For Complete Module Descriptions, See the (SLAU208)
