●The NCP1072 / NCP1075 products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a PDIP-7 or SOT-223 package, the NCP1072/5 offer a high level of integration, including soft-start, frequency-jittering, short-circuit protection, skip-cycle, a maximum peak current set point, ramp compensation, and a Dynamic Self-Supply (eliminating the need for an auxiliary winding). Unlike other monolithic solutions, the NCP1072/5 is quiet by nature: during nominal load operation, the part switches at one of the available frequencies (65, 100 or 130 kHz). When the output power demand diminishes, the IC automatically enters frequency foldback mode and provides excellent efficiency at light loads. When the power demand reduces further, it enters into a skip mode to reduce the standby consumption down to a no load condition. Protection features include: a timer to detect an overload or a short-circuit event, Overvoltage Protection with auto-recovery and AC input line voltage detection. For improved standby performance, the connection of an auxiliary winding stops the DSS operation and helps to reduce input power consumption below 50 mW at high line.
●Features | | Benefits
●---|---|---
● | | | | |
● Integrated 700 V MOSFET with RDS(on) of 11 Ω
●| |
● Up to 20W output SMPS design capability
● Current-Mode Fixed Frequency Operation (65/100/130 kHz)
●| |
● Ability to scale for efficiency or size
● Peak Current: NCP1072 = 250mA / NCP1075 = 450 mA
●| |
● Adjust output current protection based on output power demand
● Skip-Cycle Operation at Low Peak Current
●| |
● Eliminate acoustic noise
● Dynamic Self-Supply (DSS)
●| |
● Eliminate Aux winding
● Auto-Recovery Output Short Circuit Protection with Timer-Based Detection
●| |
● Provides more robust protection without worrying about the coupling of the aux winding
● Frequency Foldback Operation
●| |
● Improved efficiency at light load / Improved EMI over the entire load
● 300µA No Load Power Consumption
●| |
● <50mW no Load Power Consumption
● Frequency Jittering (including during frequency foldback mode)
●| |
● Better EMI Signature Over the Entire Operating Range
● AC Input Voltage Line Detection
●| |
● Enhanced Protection Against Faults With Low Input Voltage
