NCP1251ASN65T1G Datasheet PDF - ON Semiconductor

●Current-Mode PWM Controller for Off-line Power Supplies

●The NCP1251 is a highly integrated PWM controller capable of delivering a rugged and high performance offline power supply in a tiny TSOP−6 package. With a supply range up to 28 V, the controller hosts a jittered 65 kHz or 100 kHz switching circuitry operated in peak current mode control. When the power on the secondary side starts to decrease, the controller automatically folds back its switching frequency down to a minimum level of 26 kHz. As the power further goes down, the part enters skip cycle while limiting the peak current.

●Features

●• Fixed−Frequency 65 or 100 kHz Current−Mode Control Operation

●• Internal and Adjustable Over Power Protection (OPP) Circuit

●• Frequency Foldback Down to 26 kHz and Skip−Cycle in Light Load Conditions

●• Internal Ramp Compensation

●• Internal Fixed 4 ms Soft−Start

●• 100 ms Timer−Based Auto−Recovery Short−Circuit Protection

●• Frequency Jittering in Normal and Frequency Foldback Modes

●• Option for Auto−Recovery or Latched Short−Circuit Protection

●• OVP Input for Improved Robustness

●• Up to 28 V VCC Operation

●• Latched OVP Protection on VCC

●• +300 mA / −500 mA Source/Sink Drive Capability

●• Less than 100 mW Standby Power at High Line

●• EPS 2.0 Compliant

●• These are Pb−Free Devices

●Typical Applications

●• ac−dc Converters for TVs, Set−top Boxes and Printers

●• Offline Adapters for Notebooks and Netbooks