NLSX5014DTR2G Datasheet PDF - ON Semiconductor

●The NLSX5014 is a 4-bit configurable dual-supply autosensing bidirectional level translator that does not require a direction control pin. The I/O VCC- and I/O VL-ports are designed to track two different power supply rails, VCC and VL respectively. Both the VCC and the VL supply rails are configurable from 0.9 V to 4.5 V. This allows a logic signal on the VL side to be translated to either a higher or a lower logic signal voltage on the VCC side, and vice-versa.

●The NLSX5014 offers the feature that the values of the VCC and VL supplies are independent. Design flexibility is maximized because VL can be set to a value either greater than or less than the VCC supply. In contrast, the majority of competitive auto sense translators have a restriction that the value of the VL supply must be equal to less than (VCC - 0.4) V.

●Features

●• Wide VCC, VL Operating Range: 0.9 V to 4.5 V

●• VL and VCC are independent

●   − VL may be greater than, equal to, or less than VCC

●• High 100 pF Capacitive Drive Capability

●• High−Speed with 140 Mb/s Guaranteed Date Rate for VCC, VL > 1.8 V

●• Low Bit−to−Bit Skew

●• Overvoltage Tolerant Enable and I/O Pins

●• Non−preferential Powerup Sequencing

●• Power−Off Protection

●• Small packaging: 1.7 mm x 2.0 mm UQFN12, SOIC14, TSSOP14

●• These are Pb−Free Devices

●Typical Applications

●• Mobile Phones, PDAs, Other Portable Devices