OP213FSZ Datasheet PDF - ADI

●The OP213FSZ is a Single-supply Operational Amplifier features low noise and low drift. It has been designed for systems with internal calibration. Often these processor-based systems are capable of calibrating corrections for offset and gain, but they cannot correct for temperature drifts and noise. Optimized for these parameters, the OPx13 family can be used to take advantage of superior analogue performance combined with digital correction. Many systems using internal calibration operate from unipolar supplies, usually either 5 or 12V. Input common-mode range includes the negative supply and to within 1V of the positive supply over the full supply range. Phase reversal protection is designed into the OP213 where input voltage range is exceeded. Output voltage swings also include the negative supply and go to within 1V of the positive rail. The output is capable of sinking and sourcing current throughout its range and is specified with 600R loads.

● Single- or dual-supply operation

● Low noise (4.7nV/√Hz at 1kHz)

● Wide bandwidth

● Low offset voltage (100µV)

● Very low drift (0.2µV/°C)

● Unity gain stable

● No phase reversal

●ESD sensitive device, take proper precaution while handling the device.