OP37GSZ-REEL7 Datasheet PDF - ADI

●Product Details

●The OP37 provides the same high performance as the OP27, but the design is optimized for circuits with gains greater than five. This design change increases slew rate to 17V/µsec and gain-bandwidth product to 63MHz.

●The OP37 provides the low offset and drift of the OP07 plus higher speed and lower noise. Offsets down to 25µV and drift of 0.6µV/°C maximum make the OP-37 ideal for precision instrumentation applications. Exceptionally low noise (en=3.5nV/Hz at 10Hz), a low 1/f noise corner frequency of 2.7Hz, and the high gain of 1.8 million, allow accurate high-gain amplification of low-level signals.

●The low input bias current of ±10nA and offset current of 7nA are achieved by using a bias-current-cancellation circuit. Over the military temperature range this typically holds IB and IOS to ±20nA and 15nA respectively.

●The output stage has good load driving capability. A guaranteed swing of ±10V into 600 Ohm and low output distortion make the OP37 an excellent choice for professional audio applications.

●### Features and Benefits

● Low Noise, 80 nV p-p (0.1 Hz to 10 Hz)

●3 nV/vHz @ 1 kHz

● Low Drift, 0.2 µV/°C

● High Speed, 17 V/µs Slew Rate

●63 MHz Gain Bandwidth

● Low Input Offset Voltage, 10 µV

● Excellent CMRR, 126 dB

●(Common-Voltage @ 11 V)

● High Open-Loop Gain, 1.8 Million

● Replaces 725, OP-07,

●SE5534 In Gains > 5

● Available in Die Form