OPA2363IDGSR Datasheet PDF - TI

●DESCRIPTION

●The OPA363 and OPA364 families are high-performance CMOS operational amplifiers optimized for very low voltage, single-supply operation. These miniature, low-cost amplifiers are designed to operate on single supplies from 1.8V (±0.9V) to 5.5V (±2.75V). Applications include sensor amplification and signal conditioning in battery-powered systems.

●The OPA363 and OPA364 families offer excellent CMRR without the crossover associated with traditional complimen tary input stages. This results in excellent performance for driving Analog-to-Digital (A/D) converters without degradation of differential linearity and THD. The input common mode range includes both the negative and positive supplies. The output voltage swing is within 10mV of the rails.

●The OPA363 family includes a shutdown mode. Under logic control, the amplifiers can be switched from normal operation to a standby current that is less than 1µA.

●The single version is available in the MicroSIZE SOT23-5 (SOT23-6 for shutdown) and SO-8. The dual version is available in MSOP-8, MSOP-10, and SO-8 packages. Quad packages are available in TSSOP-14 and SO-14 packages. All versions are specified for operation from –40°C to +125°C.

●FEATURES

●1.8V OPERATION

●MicroSIZE PACKAGES

●BANDWIDTH: 7MHz

●CMRR: 90dB (typical)

●SLEW RATE: 5V/

●µ

●s

●LOW OFFSET: 500

●µ

●V (max)

●QUIESCENT CURRENT: 750

●µ

●A/Channel (max)

●SHUTDOWN MODE: < 1

●µ

●A/Channel

●APPLICATIONS

●SIGNAL CONDITIONING

●DATA ACQUISITION

●PROCESS CONTROL

●ACTIVE FILTERS

●TEST EQUIPMENT