OPA2727AIDRBR Datasheet PDF - TI

●DESCRIPTION

●The OPA727 and OPA728 series op amps use a state-of-the-art 12V analog CMOS process and

●e-trim, a package-level trim, offering outstanding dc precision and ac performance. The extremely low offset (150µV max) and drift (1.5µV/°C) are achieved by trimming the IC digitally after packaging to avoid the shift in parameters as a result of stresses during package assembly. To correct for offset drift, the OPA727 and OPA728 family is trimmed over temperature. The devices feature very high CMRR and open-loop gain to minimize errors.

●Excellent ac characteristics, such as 20MHz GBW, 30V/µs slew rate and 0.0003% THD+N make the

●OPA727 and OPA728 well-suited for communication, high-end audio, and active filter applications. With a bias current of less than 500pA, they are well suited for use as transimpedance (I/V-conversion) amplifiers for monitoring optical power in ONET applications.

●FEATURES

●• OFFSET: 15µV (typ), 150µV (max)

●• DRIFT: 0.3µV/°C (typ), 1.5µV/°C (max)

●• BANDWIDTH: 20MHz

●• SLEW RATE: 30V/µs

●• BIAS CURRENT: 500pA (max)

●• LOW NOISE: 6nV/√Hz at 100kHz

●• THD+N: 0.0003% at 1kHz

●• QUIESCENT CURRENT: 4.3mA/ch

●• SUPPLY VOLTAGE: 4V to 12V

●• SHUTDOWN MODE (OPA728): 6µA

●APPLICATIONS

●• OPTICAL NETWORKING

●• TRANSIMPEDANCE AMPLIFIERS

●• INTEGRATORS

●• ACTIVE FILTERS

●• A/D CONVERTER DRIVERS

●• I/V CONVERTER FOR DACs

●• HIGH PERFORMANCE AUDIO

●• PROCESS CONTROL

●• TEST EQUIPMENT