OPA365-EP Datasheet PDF - TI

●The OPA365 zero-crossover series, rail-to-rail, high-performance, CMOS operational amplifier is optimized for very low voltage, single-supply applications. Rail-to-rail input/output, low-noise (4.5 nV/√Hz) and high-speed operation (50-MHz gain bandwidth) make this device ideal for driving sampling analog-to-digital converters (ADCs). The OPA365 supports audio, signal conditioning, sensor amplification, defense, aerospace and medical applications. The OPA365 is also well-suited for cell phone power amplifier control loops.

●Special features include an excellent common-mode rejection ratio (CMRR), no input stage crossover distortion, high input impedance, and rail-to-rail input and output swing. The input common-mode range includes both the negative and positive supplies. The output voltage swing is within 10mV of the rails.

●The OPA365 is available in the SOT23-5 package and is specified for operation from −55°C to 125°C.

● Gain Bandwidth: 50 MHz

● Zero-Crossover Distortion Topology

● Excellent THD+N: 0.0004%

● CMRR: 96.5 dB (Min)

● Rail-to-Rail Input and Output

● Input 100 mV Beyond Supply Rail

● Low Noise: 4.5 nV/√Hz at 100 kHz

● Slew Rate: 25 V/µs

● Fast Settling: 0.3 µs to 0.01%

● Precision

● Low Offset: 100 µV

●(Typical at 25°C)

● Low Input Bias Current: 0.2 pA

●(Typical at 25°C)

● 2.2-V to 5.5-V Operation