OPA4140AID Datasheet PDF - TI

●The OPA4140AID is a 11MHz single-supply rail-to-rail output JFET Amplifier features good drift and low input bias current. The rail-to-rail output swing and input range that includes V-allow designers to take advantage of the low-noise characteristics of JFET amplifiers while also interfacing to modern, single-supply, precision analogue-to-digital converters (ADCs) and digital-to-analogue converters (DACs). The OPA140 achieves 11MHz unity-gain bandwidth and 20V/µs slew rate while consuming only 1.8mA (typical) of quiescent current. It runs on a single 4.5 to 36V supply or dual ±2.25 to ±18V supplies.

● 1µV/°C Maximum very low offset drift

● 12µV very low offset voltage

● 10pA Maximum low input bias current

● 250nVp-p 0.1 to 10Hz very low 1/f noise

● 5.1nV/√Hz Low noise

● No phase reversal

● Green product and no Sb/Br

●This IC can be damaged by ESD. We recommend that all ICs be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.