●Overview
●The QorIQ® P1010 and P1014 communications processors expand QorIQ performance into cost- and power-sensitive applications. Based on 45 nm technology, the processors provide performance up to 1000 MHz and power dissipation as low as 1.1 watts, along with extensive integration and a rich set of interfaces that target cost-sensitive endpoint applications such as:
● IP Camera
● Industrial Robot
● Wireless LAN (WLAN) Access Point
● Network Attached Storage
● Printing and Imaging
● Router
●MoreLess
●## Features
●### CORE COMPLEX
● Single e500 core, built on Power Architecture® technology
● 32 KB of L1 instruction cache and 32 KB of L1 data cache
● 400 to 1000 MHz core clock frequency
● 256 KB L2 cache with ECC, also configurable as SRAM and stashing memory
●### NETWORKING ELEMENTS
● SerDes
● 6 lanes at up to 3.125 GHz
● Supports SGMII, PCI Express® (PCIe) and SATA
●### ACCELERATORS AND MEMORY CONTROL
● 16-/32-bit DDR3 SDRAM memory controller with ECC support
● Hardware based cryptography acceleration (SEC4.0)
● Up to three gigabit Ethernet interfaces with support for IEEE® 1588
● TCP/IP acceleration, quality of service and classification capabilities
● Support for RGMII and SGMII
●### BASIC PERIPHERALS AND INTERCONNECT
● 1 x USB controller (USB 2.0) with integrated PHY, OTG and device support
● 2x Serial ATA (SATA2.0) controllers
● Serial peripheral interface (SPI)
● Trusted boot platform, integrated security
● Four-channel DMA controller
● 2 x I²C controllers, 2 x DUARTs, timers
● Integrated flash controller (IFC) with enhanced capabilities to support large pages
● 2x PCIe controllers
● 2x FlexCAN interfaces to support industrial protocols
●### ADDITIONAL FEATURES
● Trusted boot platformComparison Table
●| P1010 | P1014
●\---|---|---
●Core Frequency
● | 533 to 1000 MHz | 400 to 800 MHz
●L2 Cache
● | 256 KB | 256 KB
●DDR3
● | 16/32-bit @ 800 MHz | 16-bit @ 800 MHz
●GE Ports
● | 3 | 2
●SATA
● | 2 | 2
●PCI Express
● | 2 | 2
●Security
● | Trusted | No
●CAN
● | 2 | No
