●GENERAL DESCRIPTION
●The PIC10F200/202/204/206 devices from Microchip Technology are low-cost, high-performance, 8-bit, fully static, Flash-based CMOS microcontrollers. They employ a RISC architecture with only 33 single-word/single-cycle instructions. All instructions are single cycle (1μs) except for program branches, which take two cycles. The PIC10F200/202/204/206 devices deliver performance in an order of magnitude higher than their competitors in the same price category. The 12-bit wide instructions are highly symmetrical, result ing in a typical 2:1 code compression over other 8-bit
●microcontrollers in its class. The easy-to-use and easy to remember instruction set reduces development time significantly.
●High-Performance RISC CPU:
●• Only 33 single-word instructions to learn
●• All single-cycle instructions except for program branches, which are two-cycle
●• 12-bit wide instructions
●• 2-level deep hardware stack
●• Direct, Indirect and Relative Addressing modes for data and instructions
●• 8-bit wide data path
●• 8 Special Function Hardware registers
●• Operating speed:
● - 4 MHz internal clock
● - 1μs instruction cycle
●Special Microcontroller Features:
●• 4 MHz precision internal oscillator:
● - Factory calibrated to ±1%
●• In-Circuit Serial Programming™ (ICSP™)
●• In-Circuit Debugging (ICD) support
●• Power-on Reset (POR)
●• Device Reset Timer (DRT)
●• Watchdog Timer (WDT) with dedicated on-chip RC oscillator for reliable operation
●• Programmable code protection
●• Multiplexed MCLRinput pin
●• Internal weak pull-ups on I/O pins
●• Power-Saving Sleep mode
●• Wake-up from Sleep on pin change
●Low-Power Features/CMOS Technology:
●• Operating Current:
● - < 175μA @ 2V, 4 MHz, typical
●• Standby Current:
● - 100 nA @ 2V, typical
●• Low-power, high-speed Flash technology:
● - 100,000 Flash endurance
● - > 40 year retention
●• Fully static design
●• Wide operating voltage range: 2.0V to 5.5V
●• Wide temperature range:
● - Industrial: -40°C to +85°C
● - Extended: -40°C to +125°C
●Peripheral Features (PIC10F200/202):
●• 4 I/O pins:
● - 3 I/O pins with individual direction control
● - 1 input-only pin
● - High current sink/source for direct LED drive
● - Wake-on-change
● - Weak pull-ups
●• 8-bit real-time clock/counter (TMR0) with 8-bit programmable prescaler
●Peripheral Features (PIC10F204/206):
●• 4 I/O pins:
● - 3 I/O pins with individual direction control
● - 1 input-only pin
● - High current sink/source for direct LED drive
● - Wake-on-change
● - Weak pull-ups
●• 8-bit real-time clock/counter (TMR0) with 8-bit programmable prescaler
●• 1 Comparator:
● - Internal absolute voltage reference
● - Both comparator inputs visible externally
● - Comparator output visible externally
Part 3D Model
