●GENERAL DESCRIPTION
●The PIC12C67X devices are low-cost, high-perfor mance, CMOS, fully-static, 8-bit microcontrollers with integrated analog-to-digital (A/D) converter and EEPROM data memory (EEPROM on PIC12CE67X versions only).
●High-Performance RISC CPU:
●• Only 35 single word instructions to learn
●• All instructions are single cycle (400 ns) except for program branches which are two-cycle
●• Operating speed: DC - 10 MHz clock input
● DC - 400 ns instruction cycle
●• 14-bit wide instructions
●• 8-bit wide data path
●• Interrupt capability
●• Special function hardware registers
●• 8-level deep hardware stack
●• Direct, indirect and relative addressing modes for data and instructions
●Peripheral Features:
●• Four-channel, 8-bit A/D converter
●• 8-bit real time clock/counter (TMR0) with 8-bit programmable prescaler
●• 1,000,000 erase/write cycle EEPROM data memory
●• EEPROM data retention > 40 years
●Special Microcontroller Features:
●• In-Circuit Serial Programming (ICSP™)
●• Internal 4 MHz oscillator with programmable calibration
●• Selectable clockout
●• Power-on Reset (POR)
●• Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
●• Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
●• Programmable code protection
●• Power saving SLEEP mode
●• Interrupt-on-pin change (GP0, GP1, GP3)
●• Internal pull-ups on I/O pins (GP0, GP1, GP3)
●• Internal pull-up on MCLR pin
●• Selectable oscillator options:
● - INTRC: Precision internal 4 MHz oscillator
● - EXTRC: External low-cost RC oscillator
● - XT: Standard crystal/resonator
● - HS: High speed crystal/resonator
● - LP: Power saving, low frequency crystal
●CMOS Technology:
●• Low-power, high-speed CMOS EPROM/EEPROM technology
●• Fully static design
●• Wide operating voltage range 2.5V to 5.5V
●• Commercial, Industrial and Extended temperature ranges
●• Low power consumption
● < 2 mA @ 5V, 4 MHz
● 15 µA typical @ 3V, 32 kHz
● < 1 µA typical standby current
Part 3D Model
