●Overview
●Optimized for fast design-in, NXP’s PN7150 NFC solutions fully comply with the NFC Forum, include Linux®, Android™, and WinIoT drivers and support NCI 1.0 host communication.
●PN7150 is the high-performance version of PN7120, the plug’n play NFC solution for easy integration into any OS environment, reducing Bill of Material (BOM) size and cost. PN71xx controller are ideal for home-automation applications such as gateways and work seamlessly with NFC connected tags.
●These NFC controllers support the most popular platforms, Raspberry Pi®, BeagleBone® Black and any boards featuring an Arduino® stackable header, including Kinetis®, LPCXpresso and i.MX boards.
●MoreLess
●## Features
●### Full hardware and software compatibility
● Support for Linux, Android, Windows IoT, RTOS, NullOS
● Interface to Raspberry Pi, BeagleBone Black, and all boards with Arduino-compatible header
●### All NFC operating modes
● Read/Write Mode: ISO/IEC 14443 A&B up to 848 kbit/s, FeliCa at 212 & 424 kbit/s, MIFARE 1K, 4K, NFC Forum type 1, 2, 3, 4, 5 tags, ISO/IEC 15693
● All peer-to-peer modes
● Card Emulation Mode (from host): NFC Forum T4T (ISO/IEC 14443 A&B) at 106 kbit/s, NFC Forum T3T (FeliCa, PN7150 only)
●### Flexible host interface
● Supply voltage: 1.8 to 3.3 V
● I2C interface: 3.4 Mbit/s
● NCI 1.0-compliant protocol
● IRQ signal for improved synchronization
●### Complete, power-efficient NFC control
● RF driver: 3.0 to 4.75 V, 180mA max (PN7150); 2.7 to 3.3 V, 180mA max (PN7120)
● Implemented according to device requirements v1.3
● Fully configurable polling loop with low-power mode
● Load modulation scheme: active (PN7150), passive (PN7120)
●### Standard packages
● HVQFN40 (PN7150)
● VFBGA49 (PN7120)
Part 3D Model
