RT9711AGBG Datasheet PDF - Richtek

●General Description

●The RT9711A/B/C/D are cost-effective, low voltage, single N-MOSFET high-side power switches, optimized for self powered and bus-powered Universal Serial Bus (USB) applications. The RT9711 series are equipped with a charge pump circuitry to drive the internal MOSFET switch. The switch"s low RDS(ON), 80mΩ, meets USB voltage drop requirements. A flag output is available to indicate fault conditions to the local USB controller.

●Features

●Compliant to USB Specifications

●Built-In N-MOSFET

●  Typical RDS(ON): 80mΩ (SOT-23-5 & TSOT-23-5) and 90mΩ (SOP-8 & MSOP-8)

●Output Can Be Forced Higher Than Input (Off-State)

●Low Supply Current :

●  25μA Typical at Switch On State

●  1μA Typical at Switch Off State

●Guaranteed 1.5A for RT9711A/B and 0.6A for RT9711C/D Continuous Load Current

●Wide Input Voltage Ranges : 2.5V to 5.5V

●Open-Drain Fault Flag Output

●Hot Plug-In Application (Soft-Start)

●1.7V Typical Under-Voltage Lockout (UVLO)

●Current Limiting Protection

●Thermal Shutdown Protection

●Reverse Current Flow Blocking (no body diode)

●Smallest SOT-23-5 and TSOT-23-5 Packages

●Minimizes Board Space

●UL Approved−E219878

●TUV IEC60950-1 : 2005Certified

●RoHS Compliant and 100% Lead (Pb)-Free

●Applications

●USB Bus/Self Powered Hubs

●USB Peripherals

●ACPI Power Distribution

●PC Card Hot Swap

●Notebook, Motherboard PCs

●Battery-Powered Equipment

●Hot-Plug Power Supplies

●Battery-Charger Circuits