SA5230NG Datasheet PDF - ON Semiconductor

●The NE5230 is a very low voltage operational amplifier that can perform with a voltage supply as low as 1.8 V or as high as 15 V. In addition, split or single supplies can be used, and the output will swing to ground when applying the latter. There is a bias adjusting pin which controls the supply current required by the device and thereby controls its power consumption. If the part is operated at ±0.9 V supply voltages, the current required is only 110 A when the current control pin is left open. Even with this low power consumption, the device obtains a typical unity gain bandwidth of 250 kHz. When the bias adjusting pin is connected to the negative supply, the unity gain bandwidth is typically 600 kHz while the supply current is increased to 600 A. In this mode, the part will supply full power output beyond the audio range.

●Features

●•Works Down to 1.8 V Supply Voltages

●•Adjustable Supply Current

●•Low Noise

●•Common−mode Includes Both Rails

●• VOUT With in 100 mV of Both Rails

●•Pb−Free Packages are Available