● Controlled Baseline
● One Assembly/Test/Fabrication Site
● Extended Temperature Performance of –55°C to 125°C
● Enhanced Diminishing Manufacturing Sources (DMS) Support
● Enhanced Product-Change Notification
● Qualification Pedigree(1)
● High-Performance Static CMOS Technology
● 150 MHz (6.67-ns Cycle Time)
● Low-Power (1.8-V Core @135 MHz, 1.9-V Core @150 MHz, 3.3-V I/O) Design
● JTAG Boundary Scan Support(2)
● High-Performance 32-Bit CPU (320C28x)
● 16 × 16 and 32 × 32 MAC Operations
● 16 × 16 Dual MAC
● Harvard Bus Architecture
● Atomic Operations
● Fast Interrupt Response and Processing
● Unified Memory Programming Model
● 4M Linear Program/Data Address Reach
● Code-Efficient (in C/C++ and Assembly)
● 320F24x/LF240x Processor Source Code Compatible
● On-Chip Memory
● Flash Devices: Up to 128K × 16 Flash (Four 8K × 16 and Six 16K × 16 Sectors)
● ROM Devices: Up to 128K × 16 ROM
● 1K × 16 OTP ROM
● L0 and L1: 2 Blocks of 4K × 16 Each Single-Access RAM (SARAM)
● H0: 1 Block of 8K × 16 SARAM
● M0 and M1: 2 Blocks of 1K × 16 Each SARAM
● Boot ROM (4K × 16)
● With Software Boot Modes
● Standard Math Tables
● External Interface (2812)
● Over 1M × 16 Total Memory
● Programmable Wait States
● Programmable Read/Write Strobe Timing
● Three Individual Chip Selects
● Clock and System Control
● Dynamic PLL Ratio Changes Supported
● On-Chip Oscillator
● Watchdog Timer Module
● Three External Interrupts
● Peripheral Interrupt Expansion (PIE) Block That Supports 45 Peripheral Interrupts
● Three 32-Bit CPU-Timers
● 128-Bit Security Key/Lock
● Protects Flash/ROM/OTP and L0/L1 SARAM
● Prevents Firmware Reverse Engineering
● Motor Control Peripherals
● Two Event Managers (EVA, EVB)
● Compatible to 240xA Devices
● Serial Port Peripherals
● Serial Peripheral Interface (SPI)
● Two Serial Communications Interfaces (SCIs), Standard UART
● Enhanced Controller Area Network (eCAN)
● Multichannel Buffered Serial Port (McBSP)
● 12-Bit ADC, 16 Channels
● 2 × 8 Channel Input Multiplexer
● Two Sample-and-Hold
● Single/Simultaneous Conversions
● Fast Conversion Rate: 80 ns/12.5 MSPS
● Up to 56 General Purpose I/O (GPIO) Pins
● Advanced Emulation Features
● Analysis and Breakpoint Functions
● Real-Time Debug via Hardware
● Development Tools Include
● ANSI C/C++ Compiler/Assembler/Linker
● Code Composer Studio™ IDE
● DSP/BIOS™
● Low-Power Modes and Power Savings
● IDLE, STANDBY, HALT Modes Supported
● Disable Individual Peripheral Clocks
● Package Options
● 179-Ball MicroStar BGA™ (GHH), (2812)
● 176-Pin Low-Profile Quad Flatpack (LQFP) (PGF) (2812)
Part 3D Model
