SN65HVD07PE4 Datasheet PDF - TI

●DESCRIPTION

●The SN65HVD05, SN75HVD05, SN65HVD06, SN75HVD06, SN65HVD07, and SN75HVD07 combine a 3-state differential line driver and differential line receiver. They are designed for balanced data transmission and interoperate with ANSI TIA/EIA-485-A and ISO 8482E standard-compliant  devices. The driver is designed to provide a differential output voltage greater than that required by these standards for increased noise margin. The drivers and receivers have active-high and active-low enables respectively, which can be externally connected together to function as direction control.

●FEATURES

●• Minimum Differential Output Voltage of 2.5 V Into a 54-Ω Load

●• Open-Circuit, Short-Circuit, and Idle-Bus Failsafe Receiver

●• 1/8th Unit-Load Option Available (Up to 256 Nodes on the Bus)

●• Bus-Pin ESD Protection Exceeds 16 kV HBM

●• Driver Output Slew Rate Control Options

●• Electrically Compatible With ANSI TIA/EIA-485-A Standard

●• Low-Current Standby Mode: 1 µA Typical

●• Glitch-Free Power-Up and Power-Down Protection for Hot-Plugging Applications

●• Pin Compatible With Industry Standard SN75176

●APPLICATIONS

●• Data Transmission Over Long or Lossy Lines or Electrically Noisy Environments

●• Profibus Line Interface

●• Industrial Process Control Networks

●• Point-of-Sale (POS) Networks

●• Electric Utility Metering

●• Building Automation

●• Digital Motor Control