SN65HVD1040AQDRQ1 Datasheet PDF - TI

●The SN65HVD1040AQDRQ1 is an EMC optimized CAN Transceiver meets or exceeds the specifications of the ISO 11898 standard for use in applications employing a controller area network (CAN). As a CAN transceiver, this device provides differential transmit capability to the bus and differential receive capability to a CAN controller at signalling rates up to 1 megabit per second (Mbps)The signalling rate of a line is the number of voltage transitions that are made per second, expressed in the units bps (bits per second). It is designed for operation in especially harsh environments, the SN65HVD1040A features cross-wire, over-voltage and loss of ground protection from -27 to 40V, over-temperature protection, a -12 to 12V common-mode range and withstands voltage transients according to ISO 7637. STB (pin 8) provides two different modes of operation: high-speed mode or low-current standby mode. The high-speed mode of operation is selected by connecting STB (pin 8) to ground.

● Improved drop-in replacement for TJA1040

● GIFT/ICT Compliant

● <12µA Maximum low-current standby mode with bus wake-up

● High electromagnetic compatibility (EMC)

● Dominant time-out function

● Thermal shutdown protection

● Power-up/down glitch-free bus inputs and outputs

● High input impedance with low VCC

● Monotonic outputs during power cycling

● Green product and no Sb/Br

●Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.