●The SN65HVD178x devices are designed to survive overvoltage faults such as direct shorts to power supplies, mis-wiring faults, connector failures, cable crushes, and tool mis-applications. The devices are also robust to ESD events with high levels of protection to the human-body-model specification.
●The SN65HVD178x devices combine a differential driver and a differential receiver, which operate from a single power supply. In the SN65HVD1782, the driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. This port features a wide common- mode voltage range, making the devices suitable for multipoint applications over long cable runs. These devices are characterized from 4°C to 12°C. These devices are pin-compatible with the industrystandard SN75176 transceiver, making them drop-in upgrades in most systems.
●These devices are fully compliant with ANSI TIA/EIA 485-A with a 5-V supply and can operate with a 3.3-V supply with reduced driver output voltage for low- power applications. For applications where operation is required over an extended common-mode voltage range, see the SN65HVD1785 (SLLS872) data sheet.
● Bus-Pin Fault Protection to:
● > ±70 V (SN65HVD1780, SN65HVD1781)
● > ±30 V (SN65HVD1782)
● Operation With 3.3-V to 5-V Supply Range
● ±16-kV HBM Protection on Bus Pins
● Reduced Unit Load for Up to 320 Nodes
● Failsafe Receiver for Open-Circuit, Short-Circuit,
●and Idle-Bus Conditions
● Low Power Consumption
● Low Standby Supply Current, 1 µA Maximum
● ICC 4-mA Quiescent Current During Operation
● Pin-Compatible With Industry-Standard SN75176
● Signaling Rates of 115 kbps, 1 Mbps, and up to
●10 Mbps
● APPLICATIONS
● HVAC Networks
● Security Electronics
● Building Automation
● Telecommunication Equipment
● Motion Control
● Industrial Networks
●All other trademarks are the property of their respective owners
