SN65LVDS049PW Datasheet PDF - TI

●The SN65LVDS049PW is a dual high-speed Differential Driver and Receiver uses low-voltage differential signaling (LVDS) to achieve signaling rates as high as 400Mbps. The driver and receiver electrical interfaces are compliant to the TIA/EIA-644-A standard. The intended application of this device and signaling technique is for point-to-point baseband data transmission over controlled impedance media of approximately 100R characteristic impedance. The transmission media may be printed-circuit board traces, backplanes or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media, the noise coupling to the environment and other application specific characteristics.

● Flow-through pin-out

● High-impedance disable for all outputs

● Internal failsafe biasing of receiver inputs

● High-impedance bus pins on power-down

● 50ps Driver channel-to-channel skew (typical)

● 50ps Receiver channel-to-channel skew (typical)

● 1.4ns Driver propagation delay (typical)

● 1.9ns Receiver propagation delay (typical)

● Green product and no Sb/Br