SN65LVDT33PW Datasheet PDF - TI

●The SN65LVDT33PW is a quad LVDS data Line Receiver offers the widest common-mode input voltage range in the industry. This receiver provides an input voltage range specification compatible with a 5V PECL signal as well as an overall increased ground-noise tolerance. Precise control of the differential input voltage thresholds allows for inclusion of 50mV of input voltage hysteresis to improve noise rejection on slowly changing input signals. The input thresholds are still no more than ±50mV over the full input common-mode voltage range. The high-speed switching of LVDS signals usually necessitates the use of a line impedance matching resistor at the receiving-end of the cable or transmission media. The SN65LVDT series of receiver eliminates this external resistor by integrating it with the receiver. The non-terminated SN65LVDS series is also available for multidrop or other termination circuits.

● Operates with a single 3.3V supply

● Integrated 110R line termination resistors on LVDT products

● Active failsafe assures a high-level output with no input

● Bus-pin ESD protection exceeds 15kV HBM

● Input remains high-impedance on power-down

● TTL inputs are 5V tolerant

● Pin-compatible with the AM26LS32, SN65LVDS32B, µA9637 and SN65LVDS9637B

● 400Mbps Signalling rate

● 200Mbps Data transfer rate

● -4 to 5V Common-mode input voltage range

● Green product and no Sb/Br