●The SN74AUP1T34-Q1 device is a 1-bit noninverting translator that uses two separate configurable power-supply rails. It is a unidirectional translator from A to B. The A port is designed to track VCCA. VCCA accepts supply voltages from 0.9 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts supply voltages from 0.9 V to 3.6 V. This allows for low-voltage translation between 1-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes. The SN74AUP1T34-Q1 is also fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
●The VCC isolation feature ensures that if VCCA input is at GND, the B port is in the high-impedance state. If VCCB input is at GND, any input to the A side does not cause the leakage current even floating.
● Qualified for Automotive Applications
● AEC-Q100 Qualified
● Device Temperature Grade 1: –40°C to 125°C
●Ambient Operating Temperature
● Device HBM ESD Classification Level 3A
● Device CDM ESD Classification Level C5
● Wide Operating VCC Range of 0.9 V to 3.6 V
● Balanced Propagation Delays: tPLH = tPHL
●(1.8-V to 3.3-V Translation Typical)
● Low Static-Power Consumption: Maximum of 5-µA
●ICC
● ±6-mA Output Drive at 3 V
● Ioff Supports Partial Power-Down-Mode Operation
● VCC Isolation Feature – If VCCA Input Is at GND,
●B Port Is in the High-Impedance state
● Input Hysteresis Allows Slow Input Transition and
●Better Switching Noise Immunity at Input
● ESD Protection Exceeds JESD 22
● 5000-V Human-Body Model (AEC-Q100-002-E)
● Latch-Up Performance Meets
●100 mA Per Q100-004-D
